FCI - Fluid Components International Products
FCI announces ST75 Series Air/Gas Flow Meter for gas dosing, injection measurement
- FCI - Fluid Components International
It can be calibrated to measure gases over a flow range from 0.04 to 559 SCFM (0.07 to 950 NCMH), depending on line size, which is useful in low-flow applications requiring small doses.
FCI announces enhanced version of ST50 mass flow meter series
- FCI - Fluid Components International
The installation of ST50 Series Flow Meters in the process control loops of industrial air blower and dryer systems provides hot air flow rate monitoring. The use of mass flow meters ensures rate of flow measurement and totalized flow measurement for zone control and overall system operational efficiency.
FCI announces enhanced version of MT100 Series of flow meters
- FCI - Fluid Components International
FCI’s MT100 Series Flow Meters, with the optional CEMS and CERMS applications package, provide a 24-hour interval automated calibration drift test of low and high span points, and interference sensor check.
FCI announces enhanced ST51 series of thermal mass flow meters for landfill gas flow measurement
- FCI - Fluid Components International
Designed for process and plant engineers challenged with measuring wet dirty mixed gases in solid waste operations with co-generation electric power systems, the enhanced ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) is designed to provide continuously accurate measurement of landfill gas flow to the co-gen electric power engines.
FCI introduces updated versions of FLT93S and FLT93F switches
- FCI - Fluid Components International
Applications include wet/dry detection, sump level detection, high/low level alarm and control, interface control in separation vessels, foam and sediment interface control, and agitation detection.
FCI announces enhanced ST51 series of thermal mass flow meters
- FCI - Fluid Components International
Process engineers responsible for on-site plant biomass combined heat and power (CHP) systems may find the ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) provides accurate measurement of syngas fuel flow to the CHP engine.
FCI announces enhancements to FS10i Flow Switch/Monitor
- FCI - Fluid Components International
The FS10i Flow Switch/Monitor operates over a flow range in air/gas from .25 FPS to 400 SFPS [0,076 MPS to 122 MPS] and in water from 0.01 FPS to 0.5 FPS [0,003 MPS to 0,15 MPS]. Repeatability: ±0.5% of reading.
FCI's FLT93L Flow Switch aims to enhance safety for natural gas facilities
- FCI - Fluid Components International
FCI’s inline FLT93L Flow Switch is a thermal dispersion flow/level/temperature switch that was designed based on FCI’s more than 50 years of flow/level/temperature switch applications experience
FCI introduces model ST102A Flow Meter and the MT100 Series Flow Meters
- FCI - Fluid Components International
Designed specifically for flow measurement in round pipes or stacks of 12 inches [300 mm] and larger diameter, and square or rectangular ducts with cross sectional area of 100 inches [250mm] and larger, the model ST102A Flow Meter and the new MT100 Series Flow Meters from Fluid Components International (FCI) provide two to eight non-clogging, no moving parts sensing points.
FCI introduces the AS-FT Flow Transmitter
- FCI - Fluid Components International
The AS-FT Flow Transmitters from FCI Aerospace are designed to meet the demand for full qualification compliance with the performance and measurement capability necessary to serve a variety of aircraft air/gas/fluid flow applications.