A subsidiary of the International Society of Automation
Cancel
Search Sponsored By Sponsor

FCI - Fluid Components International Products

FCI adds remote mount to ST75 thermal mass flow meter

  • FCI - Fluid Components International

Remote mountable configuration is suitable for applications in hazardous areas or hard-to-reach locations.

FCI introduces NuTec LS2000 level switch

  • FCI - Fluid Components International

The LS2000 two-wire, 4-20mA thermal mass flow level switch serves as a drop-in replacement for mechanical float and paddle switches.

FCI releases ST75V Hydrogen Flow Meter

  • FCI - Fluid Components International

ST75V Hydrogen Flow Meter provides gas flow measurement in hazardous small line gas process applications where agency safety approvals are required.

FCI introduces ST50 remote mount thermal mass flow meter

  • FCI - Fluid Components International

ST50 works where an air/gas flow meter transmitter has to be mounted to avoid hazardous areas or put in difficult-to-reach, equipment-crowded locations.

FCI FLT93 Flow and Liquid Level Switch Receives SIL-2 Rating

  • FCI - Fluid Components International

The FLT93 Switch Series has been classified as Type A subsystem in accordance to IEC 61508-1 with a hardware failure tolerance of 0.

FCI introduces VeriCal Calibration System for GF90 Flow Meter

  • FCI - Fluid Components International

VeriCal lets plant technicians confirm flow measurement accuracy without removing the meter from the pipe or process, saving time and money.

FCI introduces ST50 thermal mass flow meter

  • FCI - Fluid Components International

ST50 has 1 percent accuracy, fits line sizes from 2 to 24 in., and is suitable for air, compressed air, HVAC and process gases, including nitrogen.

FCI releases ST75V gas flow meter

  • FCI - Fluid Components International

ST75V thermal mass flow meter measures hydrogen, natural gas, and other gases in small line processes and skid-mounted equipment.

FCI releases NuTec FS2000L sanitary flow switch

  • FCI - Fluid Components International

NuTec FS2000L inline flow switch has non-intrusive design that eliminates contact between the process media and the flow sensor.

FCI introduces MT91 Mass Flow Meter for stack gas

  • FCI - Fluid Components International

MT91 is available with a tough chromium-carbide coating that protects it from dirty, abrasive and hot particulates.